Preparing a concrete floor removing oil spots cleaning degreasing the floor scrubbing vacuuming etc can be quite labor intensive.
Diamond grinding concrete floors prior to epoxy caoting.
This step can be anything from diamond grinding etching shot blasting scarification and scabbling.
Diamond grind the coating.
If the core sample indicates contamination into the concrete that cannot be removed by abrasive blasting the floor will probably never allow a coating to adhere.
There are a number of coatings that are suitable for concrete floors and one of these is paint more specifically epoxy paint.
Check substrate carefully before applying epoxy.
Solvent wipe surface with denatured alcohol.
Vacuum the surface to remove dust and debris.
Allow to soak for 15 to 20 minutes.
At granite garage.
This method will restore smoothness to your floor which is needed prior to an epoxy coating.
Dampen the concrete surface and then apply a 1 1 solu tion of great lakes laboratories extra muscle and water.
The purpose is to restore the smoothness of the surface and make it even for proper application of epoxy.
Diamond grinding does not cause the micro fracturing in the top of the concrete floor so it s less destructive to the topmost remaining surface of the concrete.
Using this tool makes the process faster compared to using the more traditional grinding method.
The micro fractures can decrease the coatings bond strength astm d7234 05 pull off adhesion strength of coatings on concrete.
Degreasing a concrete floor.
The second method for preparing your floor is diamond grinding.
This prep tool has a polishing wheel with diamond coated blades that can accurately scrape the concrete floor through friction or erosion.
Concrete must be properly prepared before a coating can be applied.
How to grind a concrete floor to accept epoxy paint.
Epoxy coatings are also referred to as epoxy paint and like any other paint job proper preparation of the surface is essential.
Granite garage floors diamond grinds the floor to remove stains and paint to ensure the concrete surface is clean and porous before installing your garage floor epoxy coating.
Each coat needs to be applied with 24 hours.
Learn how to professionally prepare concrete for epoxy by using a diamond grinder.
Re apply the epoxy following product data sheet instructions.
You will need a floor grinder with the proper attachments for your floor.
If you want professional results and a long lasting epoxy coating then gr.