Buffers are for stripping floors.
Difference between floor scrubber and burnisher.
If you re just getting into the field of building service maintenance or office cleaning you re sure to face the decision of whether to use a floor buffer or a floor scrubber for your cleaning jobs.
To maneuver the operator is in full control as it moves side to side hence the nickname side to side machine.
Just know that you ll run across the terms floor buffer and rotary floor machine as meaning the same thing.
While buffers and burnishers are both used for hard floor maintenance they are not the same cleaning equipment and can t be used interchangeably.
Industrial cleaning equipment can be difficult to understand at times.
Scrubbers do not generate a polished finish.
Burnishers look similar to buffers but are much heavier which provides added pressure to help produce a wet look shine.
They cannot clean strictly so you have to make sure that you have cleaned the surface before applying polish from either machine.
Burnishers are for restoring floors shine.
It is used for cleaning a large area quickly.
The result is a clean sparkling floor.
When to use floor scrubbers.
Floor burnishing requires a burnisher.
A rotating head scrubs the floor and the equipment suctions the liquid and dirty water up and off of the floor.
With a buffer there is also a rotating head that scrubs and polishes the floor.
Instead of moving side to side burnishers operate in a straight line going back and forth.
We ll address that difference in a minute.
Floor buffers vs floor burnishers buffing and burnishing both involve applying polish to the floor using speed machines.
A floor scrubber starts cleaning floors by ejecting liquid cleanser onto the floor.
Automatic floor scrubbers may have a rotating head similar to buffers but many models offer a cylindrical brush head.
You may think at first these must be the same kind.
The biggest differences between a buffer and a burnisher are the speed motion and floor maintenance tasks they are used on.
Floor buffers and burnishers are similar looking equipment but have very different fu.
A buffer rests directly on the pad creating 100 contact between the floor and the pad.
The low rpm means they don t generate enough heat to melt the floor sealer and hide scratches.
Let s examine floor polishers burnishers and scrubbers.
Buffers are made to spin at a variety of speeds.
The floor scrubber has the lowest rpm of the three different machines.